Our Products

FEATURED PRODUCTS

Geogrid - Techgrid

TechGrid Geogrids are knitted and PVC coated polyester...Read More.

Woven Geotextile - TFI Series

We manufacture three variants of woven geotextiles...Read More.

REPAIR/IMPROVEMENT OF ROADS WITH GEOSYNTHETIC


+ View Products
PROJECT DESCRIPTION
Project

CoImprovement to Tasgaon-Kavthe Mahakal Road SH-155 Km 4/000 to 4/300, Tal-Tasgaon, Dist-Sangli

Client

Public Works Department, Sangli.

Contractor:

Guruprasad Construction Company, Tasgaon

Product:

TFI TGB -40

Manufacturer:

TechFab (India) Industries Ltd.

Design Concept:

TechFab (India) Industries Ltd.

Approach Width:

5.5m

Compaction of Subgrade
Laying of TGB-40
Problem:

Tasgaon-Kavthe Mahakal Road SH-155 Km 4/000 to 4/300, Tal-Tasgaon, Dist-Sangli passes through rich black cotton soil having a very low CBR value. The road was subjected to heavy vehicular traffic intensity because of State Highway and was also surrounded by the irrigable land on both sides. With the onset of monsoon the road got heavily water logged and due to the existence of the black cotton soil and high traffic intensity certain stretches of road got heavily distressed with significant settlement, unevenness & fatigue cracks. Black cotton soil contains montmorillonite mineral, because of which the soil becomes very slushy when in contact with water and gets brittle on drying. These alternate cycles of wetting and drying makes the highly unsuitable for any type of construction. Flexible pavement designed over this type of soil requires very high crust thickness, which makes it uneconomical.

Public Works Department, Sangli thereby awarded the Improvement of Tasgaon-Kavthe Mahakal Road SH-155 Km 4/000 to 4/300, Tal-Tasgaon, Dist-Sangli respectively.

WBM Layer
Compaction
The Solution:

TechFab (India) Industries Ltd suggested the use of TechGrid Biaxial Geogrid TGB40 for the sub grade stabilization / basal reinforcement of the existing road stretches comprising of black cotton soil, high traffic intensity & water logging.

TechGrid Geogrid TGB Series are manufactured from superior grades of polyester filament yarn with high tenacity, high tensile modulus, low creep and low shrinkage. Yarns with high molecular weight (> 25,000) and low carboxyl end groups (< 30) are used to ensure durability of the Geogrids used in permanent structures.

The grid structure is formed from the yarns using an advanced weft insertion; warp knitting technology employing state-of-the-art warping and knitting machines. This advanced technology ensures a product with uniform structure and consistent properties. The knitted grid is then given high quality polymeric coating using a specially formulated PVC compound. The coating completely saturates and envelopes the polyester yarn bundles forming a protective cover enhancing – dimensional stability of the Geogrid, resistance to installation damage and protection from the environment. Road has been left for traffic after completion of WBM. There is no settlement seen from last one month.

Execution:

The existing road at the said stretches was first dressed to get the required cross slope, over which 200mm of murrum layer was laid. Water Bound Macadam (WBM) consisting of 40/60 metal was laid in two layers for a total of 225mm thickness. TechGrid Biaxial Geogrid TGB-40 was then laid over the prepared surface in a tight condition, so that it can develop the required tension. Burnt Bitumen Macadam (BBM) of 75mm thick and asphalt carpet 20mm thick was laid over the same.

Watering on Compacted layer
Prepared Surface
Benefits:

Improved lateral confinement of aggregates

Distributes load over a larger area

Increase in bearing capacity & shear strength of sub grade

Reduction in sub base thickness

Increase in life of pavement

FOR FURTHER DETAILS

TechFab India Industries Ltd.
711/712, Embassy Centre,
Nariman Point, Mumbai – 400021

022-2287 6224/6225

022- 2287 6218

anant@techfabindia.com

www.techfabindia.com

Made With by HEPTA