Our Products

FEATURED PRODUCTS

Geogrid - Techgrid

TechGrid Geogrids are knitted and PVC coated polyester...Read More.

Woven Geotextile - TFI Series

We manufacture three variants of woven geotextiles...Read More.

Techgeo nonwoven (ng2) For Landscaping / Podium gardens


+ View Products
INTRODUCTION:

TechGeo Nonwoven Geotextiles are high quality polypropylene; staple fibers mechanically bonded through needle-punching. The basic functioning of the product is to serve as separation and filter material. Landscaping / Podium Gardens are one of the manifold applications which TechGeo Nonwoven Geotextiles can cater to the construction industry. Following is the brief description of Installation procedure for TechGeo Nonwoven Geotextile-NG2 for Landscaping / Podium Garden application:

1) LAYING OF DRAIN BOARD / AQUADUCT:

Install the Drain Board / Aqua duct, as shown in the Figure 1 & 2, over the prepared surface i.e. sub soil / slab top etc. The board shall be selected depending upon the overburden placed over it and the drainage characteristics required. The same should be provided with minimum cross slope for easy drainage of water.

Figure1. Laying of Drain Board
Figure2. Laying of Drain Board
2) LAYING OF TECHGEO NONWOVEN GOETEXTILE- NG2:

Unroll TechGeo Nonwoven Geotextile-NG2 over the laid drain board / aqua duct, as shown in Figure 3 & 4. TechGeo NG2 shall be laid such that there are no wrinkles or folds over the laid surface. Small heaps of sand or overlying material can be placed at fixed intervals to keep TechGeo-NG2 in position. No vehicle shall be allowed to move directly over the laid TechGeo NG2. TechGeo NG2 shall act as “Separator” and “Filter” material between the underlying drain board and overlying soil fill. It prevents the clogging of the drain board by the overlying soil material and at the same time allows surface water to seep through the overlying soil into the drain board.

Figure3.Laying of TechGeo NG-2
Figure4.Laying of TechGeo NG-2
3) LAYING OF COARSE SWEET SAND:

Place 50 to 75 mm of coarse sweet sand over the placed TechGeo-NG2., as shown in Figure 5 & 6. The placed sand layer will keep the TechGeo-NG2 in position over the drain board and preventing against clogging.

Figure5. Laying of Coarse Sweet Sand
Figure6. Laying of Coarse Sweet Sand
4) LAYING OF SOIL PLANTING MIXTURE:

Lay a layer of soil planting mixture over the placed sand layer, as shown in the Figure 7 & 8. The same will assist the growth of the root of the plants/grass to be grown. The thickness of the soil planting mixture will depend upon the root zone of the particular plant / grass to be grown.

Figure7. Laying of Soil Planting Mixture
Figure8. Laying of Soil Planting Mixture
5) AFTER COMPLETION:

Figure 9& 10, shows the completed Podium Garden / Landscape after growth of vegetation.

Figure9. After Completion
Figure10. After Completion
FOR FURTHER DETAILS

TechFab India Industries Ltd.
711/712, Embassy Centre,
Nariman Point, Mumbai – 400021

022-2287 6224/6225

022- 2287 6218

anant@techfabindia.com

www.techfabindia.com

Made With by HEPTA