Profile

TechFab India started its operations in 2003. Our head office is at Mumbai and we have sales offices at New Delhi, Baroda and Hyderabad. Our manufacturing facilities are located in Silvassa, Daman & Haridwar. Currently we are manufacturing the following range of products:

TechGrid

Knitted and Polymeric Coated Polyester Geogrids

TGC

Reinforced Nonwoven Composites

TechGlass AIC

AIC Asphalt Reinforcement Composite

TechGeo

Nonwoven Geotextiles

TechPave

Nonwoven Paving Fabrics

TFI 1000

Series Woven PP Multifilament Geotextiles

TFI 3000

Series High Strength Polyester Woven Geotextiles

TechDrain - Drainage composite

Geo Composite

TechDrain PVD

Prefabricated Vertical Drains

TECHFAB METAL Gabions/Mattress/Sack Gabions/Netting

Metal Gabions

TechFab

Geotextile Tubes and Bags

TechFab

Polypropylene Staple Fibres

TechGrid PP Biaxial

PP Extruded Biaxial Geogrid

TechCell

Geocell

TechStrip Polymeric Strip

Polymeric Strip 

TechGeo Mattress

GeoMattress

TechMat TD7000

Erosion Control Mat

TechRhombus

Flexible Rope Net System

TechSlope Mesh

Flexible Slope Stabilization System

TechAnchor

Self Drilling Anchors

Snow Fence & Snow Nets

Snow Fence & Snow Nets

Flexible Rockfall Barrier

Rockfall Barrier

Debris Flow Barrier

Debris Flow Barrier

We strive to continuously improve the quality and reliability of our products:

• All our manufacturing facilities have ISO 9001:2015 certification
• All our manufacturing facilities have full-fledged in-house laboratories for quality control testing
• Our products have been extensively tested at many of world’s leading independent accredited laboratories
• Many of our products like Techgrid geogrids, TGC reinforced nonwoven composites, TechGeo nonwovens and TFI 3000 and 1000 Series wovens have CE certification.
• TechGrid Geogrids have British Board of Agreement Certification
• TechGeo Nonwoven Geotextiles have been evaluated and qualified under AASHTO NTPEP
• TechGeo Nonwoven Geotextiles have been evaluated and qualified under NORGEO SPEC 2012
• TFI 3000 also is NTPEP evaluated

Our highly qualified and experienced engineers are always ready to support with necessary inputs to design and implement the most optimum solution. We offer following services:

• • Product Selection
  • Guide Specification
  • Preliminary design suggestions and budgetary estimates
  • Techno-commercial proposals
  • Detailed design and drawings
  • CQA and CQC procedures
  • Installation guidelines
  • Supervision of Installation

With our strong commitment and focus towards indigenous manufacturing of a wide range of world class geosynthetics, we offer our customers the following advantages:

• • High quality products at competitive prices
  • Quick deliveries

We assure the best in terms of quality of products, engineering capability, competitive pricing and delivery schedules.

TechFab India has various manufacturing facilities in Silvassa & Daman.

• TechFab India set up its first state-of-the-art manufacturing facility for producing a wide range of woven geotextiles in Silvassa, Dadra & Nagar Haveli union territory of India. Products like polypropylene tape and fibrillated tape geotextile are being manufactured for the first time in India.
• To cater to the rapidly growing demand for geogrids in India, a state-of-art knitted and PVC coated polyester geogrid manufacturing facility has been setup at Silvassa. The plant has the most sophisticated machinery imported from Germany and a full fledged laboratory for testing of products in accordance with internationally accepted test standards. Other products being manufactured in this plant bitumen coated Glassfibre Geogrids for asphalt reinforcement and reinforced non-woven composites for applications involving multiple functions..
• To service the increasing demand for Pre-fabricated Vertical Drains, a modern production facility, which in one of its kind in India, has been established at Silvassa. The plant has latest machineries to manufacture a range of PVD’s and has a well-equipped in house laboratory.
• Continuing with our vision of manufacturing complete range of geosynthetics, we have started manufacturing a wide range of needle-punched non-woven geotextiles in our new and latest plant in Daman, Daman and Diu union territory of India.

Techfab India was founded in 2003 with the objective of providing world-class geosynthetic products and services to cater to the needs of infrastructure and construction sectors. We are now India’s leading manufacturer of geosynthetics in terms of the very wide range and high quality of our products and exceptional manufacturing capacity. We manufacture a very wide range of products at our three state-of-the-art facilities located in Silvassa and Daman including TechGrid and TechGrid PP geogrids, TechStrap geostrips, TechGeo nonwoven geotextiles, TFI 3000 woven geotextiles, TechPave paving geotextiles, TGC reinforced nonwoven composites, TechTube geotextile bags and tubes, TechCell geocells, TechDrain PVDs and drainage composites and TechFab metal gabions. All these products have the prestigious GreenPro certification guaranteeing that our products are environmental friendly throughout its life cycle.

Having successfully met the challenge of ensuring adequate supplies of world-class indigenously manufactured geosynthetics for the growing needs of the rapidly expanding infrastructure sector, we are expanding our business to serve the needs of geohazard mitigation. The effects of climate change and associated extreme rainfall events are triggering geohazards on an unprecedented scale, threatening lives, livelihoods, lifelines and property. We have focused on the development of new range of products to facilitate engineered structural measures for geohazard mitigation.

Landslides, rockfalls, avalanches and other slope failures triggered by extreme rainfall events and developmental activities are increasingly becoming a major hazard in mountainous and hilly areas. Measures for controlling slope failures and protecting the lives of the people residing in these areas and the large number of tourists and pilgrims travelling to these locations are to be accorded the highest priority. Recognizing this critical need, Techfab India has established a state-of-the-art manufacturing facility at Haridwar to produce a new line of engineered high performance products made from high quality steel, which have extensive applications in slope stabilization and protection.

Our range of specialty products specifically engineered for the mitigation of geohazards associated with slope failures includes the following product lines:

TechRhombus High Tensile Rope Net System

TechRhombus is a very strong, tough and flexible steel rope net system comprising high tensile steel wire ropes and steel wire knot (SWK) or high resistance clip (HRC) jointing systems which can be used for both active and passive rockfall protection. TechRhombus with Galfan coating has exceptional corrosion resistance.

In the simple drapery system for rockfall protection, TechRhombus is used as the primary mesh and a layer of double twisted hexagonal steel wire mesh is used as the secondary mesh. Both meshes are secured with top layer of anchors/rock bolts and top support rope secured with wire rope anchors.

TechSlope Mesh Flexible Slope Stabilization System

TechSlope Mesh is a very strong and flexible net made from high tensile steel wires which is used as a flexible facing system for stabilizing rock and soil slopes in combination with rock bolts / anchors /soil nails. The mesh is connected to anchoring elements using steel bearing plates or using a grid beam method. The product with Galfan coating has exceptional corrosion resistance. Adjacent TechSlope Mesh panels are connected using special connection clips. TechSlope Mesh facing systems have several advantages over conventional rigid facings like shotcrete.

Major advantages of TechSlope Mesh include:

• High tensile strength
• Light weight
• Exceptional corrosion resistance with Galfan coating
• Economical
• Green solution

TechAnchor Self Drilling Anchors

TechAnchors are high performance self-drilling anchors with high tensile strength, excellent bond with soil and rock and exceptional durability. TechAnchors are available in various sizes and with protective coatings like zinc, epoxy etc. The anchors are supplied with all required accessories like drill bits, couplers, bearing plate and hex nuts. Several types of drill bits like cross, clay, jetting, segment etc. are available to suit different site conditions. TechAnchor system is fully compliant to EN 14490.

TechAnchors are designed to drill without casing in loose soils as well as rock. These have extensive applications in slope stabilization, retaining structures, foundations of structures, tunnelling and mining. The system can be used for both temporary and permanent applications.

With TechAnchors, there is no need for cased boreholes and there is increased productivity since drilling, insertion and grouting is done in a single operation.