The river Swan originates from Joh?Marwari village near Daulatpur Chowk in Amb tehsil in district Una, Himachal Pradesh. The river then flows through district Una and after traversing a distance of 85 km, the river Swan confluences with river Satluj at Anandpur Sahib in Punjab.
The Swan River traverses a total distance of 65 km in Himachal Pradesh. The river Swan has a total catchment of 140,000 ha out of which 120,000 (85.7%) ha lies in the Himachal Pradesh. The river is fed by about 73 tributaries during its traverse in Himachal Pradesh.
SLOPE PROTECTION OF SWAN RIVER IN THE STATE OF HIMACHAL PRADESH USING TECHGEO PN 30 AS GEOTEXTILE FILTER CLOTH
In district Una, river Swan flows through inter?mountainous valley. The Catchment of river Swan is largely degraded due to significant human interferences. The forests have been cleared to meet the fuelwood, fodder and timber requirements, or for commissioning of various infrastructure projects. This has led to serious drainage problems. As a result, the entire precipitation results in rapid flow into the tributaries which ultimately reach Swan river. It results in flash floods leading to heavy floods causing large scale erosion of land, damage to property and crops, disruption of communication, loss of human lives and livestock, etc. Pebbles, gravel, soil, etc. are deposited in the early reaches of the tributaries and fine sediments consisting of sand, etc. flow with the run off and ultimately get deposited on agriculture fields causing heavy damage to land and property.
The methodology of River Bank Protection was proposed by M/s WAPCOS using Crated Apron , Geotextile and Stone Pitching on the Embankment . The crated aprons at the toe are so provided Swan River experience flash floods every season.
TECHGEO PN 30 AS GEOTEXTILE FILTER
The core of the embankment shall be of clayey soil and spur will be in stones duly filled in wire crates. The top width of embankment is 6 m with side slope of 2:1. Free board of 1 m is kept and seepage protection is through clay core. The details of various protection measures are given in Table below.
TechGeo acts to separate two layers of soil that have different particle size distributions, This prevents base materials from penetrating into underlying soft subgrade soils, thus maintaining design thickness and integrity of the layer.
This allows water to move through the soil while retaining all upstream soil particles. It is used to prevent soils from migrating into drainage aggregate or pipes while maintaining flow through the system.
TechGeo acts as a drain to carry fluid flow through less permeable soils. It dissipates pore water pressures at the base of embankments.